Validation of a HPLC/MS method for simultaneous quantification of clonidine,morphine and its metabolites in human plasma

A high‐performance liquid chromatography–tandem mass spectrometry method was developed and validated for the simultaneous quantification of morphine, morphine's major metabolites morphine‐3‐glucuronide and morphine‐6‐glucuronide, and clonidine, to support the pharmacokinetic analysis of an ongoing double‐blinded randomized clinical trial that compares the use of morphine and clonidine in infants diagnosed with neonatal abstinence syndrome. Plasma samples were processed by solid‐phase extraction and separated on an Inertsil ODS‐3 (4 μm) column using an 0.1% formic acid in water–0.1% formic acid in methanol gradient. Detection of the analytes was conducted in the positive multiple reaction monitoring mode. The range of quantitation was 1–1000 ng/mL for morphine, morphine‐3‐glucuronide and morphine‐6‐glucuronide, and 0.25–100 ng/mL for clonidine. Intra‐day and inter‐day accuracy and precision were ≤15% for all analytes across the quantitation range. Extraction recovery rates were ≥94% for morphine, ≥90% for M3G, ≥87% for M6G and ≥ 79% for clonidine. Matrix effect ranged from 85–94% for clonidine to 101–106% for M3G. The method fulfilled all predetermined acceptance criteria and required only 100 μL of starting plasma volume. Furthermore, it was successfully applied to 30 clinical trial plasma samples.     

A pH-Sensitive Zwitterionic Iron Complex Probe with High Biocompatibility for Tumor-Specific Magnetic Resonance Imaging

Accurate diagnosis of tumor characteristics, including its location and boundary, is of immense value to subsequent therapy. Activatable magnetic resonance imaging (MRI) contrast agents that respond to tumor-specific microenvironments, such as the redox state, pH, and enzyme activity, enable better mapping of tumor tissue. However, the practical application of most reported activatable agents is hampered by problems including potential toxicity, inefficient elimination, and slow activation. In this study, we developed a zwitterionic iron complex (Fe-ZDS) as a positive MRI contrast agent for tumor-specific imaging. Fe-ZDS could dissociate in weakly acidic solution rapidly, accompanied by clear longitudinal relaxivity (r₁) enhancement, which enabled the complex to act as a pH-sensitive contrast agent for tumor-specific MR imaging. In vivo experiments showed that Fe-ZDS rapidly enhanced the tumor-to-normal contrast ratio by >40 %, which assisted in distinguishing the tumor boundary. Furthermore, Fe-ZDS circulated freely in the bloodstream and was excreted relatively safely via kidneys owing to its zwitterionic nature. Therefore, Fe-ZDS is an ideal candidate for a tumor-specific MRI contrast agent and holds considerable potential for clinical translation.     

Exploring the electro‐optical properties of conjugated polymers based on oligo‐selenophene and oligo(3,4‐ethylenedioxyselenophene)

For seeking high‐efficiency narrow‐band‐gap donor materials to enhance short‐circuit current density for organic solar cells, a series of oligo‐selenophene (OS) and oligo(3,4‐ethylenedioxyselenophene) (OEDOS) with various chain lengths were designed and characterized using density functional theory (DFT) and time‐dependent DFT calculations. Based on the results, it can be seen that with increasing chain length of the oligomers in both syn‐ and anti‐adding manners, the bond length alternation is decreased which indicates that the π‐electron delocalization is increased. Also, when the chain length is increased the electronic energy gap and the optical energy gap are decreased. It can be concluded that the syn‐(OS)_n=10,14,15, anti‐(OS)_n=14 and anti‐(OEDOS)_n=7–12 oligomers can act as low‐band‐gap polymers. Therefore they can absorb more sunlight based on maximum wavelength (higher than 620 nm). Furthermore, a red shift in the simulated absorption spectra of (OS)_n and (OEDOS)_n donors is observed. It is found that (OS)_n=14,15 with syn configuration of the extended oligomers is the most suitable donor for the design of high‐performance organic solar cells possessing a narrow electronic band gap, high exciton lifetime and broad and intense absorption spectra that cover the solar spectrum leading to complete light‐harvesting efficiency.     

Buprofezin dissipation and safety assessment in open field cabbage and cauliflower using GC/ITMS employing an analyte protectant

An analytical method for the determination of buprofezin residues in cabbage and cauliflower was developed and validated using gas chromatography with ion trap mass spectrometry. The analyte protectant d ‐sorbitol was used at a concentration level of 0.5 mg mL^?1 in acetonitrile instead of in matrix for constructing the calibration curves of the buprofezin standard. The average recoveries ranged from 91.3 to 96.8%, with an RSD of ≤2.7%. The limits of detection and quantitation of the method in cabbage and cauliflower were 1.3, 1.7 and 4.3, 6.2 μg kg^?1, respectively. The residual levels and dissipation kinetics of buprofezin 25% wettabe powder in cabbage and cauliflower cultivated under open field conditions was investigated at the single (T1) and double (T2) recommended rates of application. Half‐life periods were found to be 1.73 and 2.1 days in cabbage, whereas in cauliflower, these values were 1.85 and 2.36 days at T1 and T2, respectively. Based on the dissipation study, and the maximum residue limit value of 0.05 mg kg^?1, the proposed pre‐harvest interval of buprofezin in cabbage was 3–6 days and that in cauliflower was 4–10 days. The results showed that buprofezin is safe for application at both recommended application rates.     

Mathematical Modeling of Nylon 6/6,6 Copolymerization in Batch Reactor: Investigating Recipes without Water and with Cyclic Dimer

A model is used to simulate batch copolymerization of caprolactam with hexamethylene diamine (HMD) and adipic acid (ADA) to produce nylon 6/6,6. Four different recipes are considered: a recipe containing caprolactam and an aqueous solution of HMD and ADA, a recipe containing caprolactam and dry HMD/ADA salt, and two recipes with a portion of the caprolactam replaced by nylon 6 cyclic dimer (CD). Consuming CD would be advantageous because CD is an undesirable side product from nylon 6 production. Simulation results lead to three important findings: (i) operation using dry salt rather than aqueous salt solution leads to higher degree of polymerization, (ii) substantial quantities of CD can be consumed to produce nylon 6/6,6 copolymer, and (iii) including water in the recipe is beneficial for achieving improved consumption of CD. The results of this study will be helpful in designing experiments aimed at improving industrial nylon 6/6,6 copolymerization processes.     

Salen–Mg-doped NH2–MIL-101(Cr) for effective CO2 adsorption under ambient conditions

A novel metal-doped metal–organic framework (MOF) was developed by incorporating salen–Mg into NH₂–MIL-101(Cr) structure under ambient conditions. The Schiff base complex was successfully prepared by condensing salicylaldehyde with a free amino group and then coordinating metal ions. Such a structure can endow the sample with higher CO₂ adsorption performance. At 0°C and 1 bar, the salen–Mg-modified sample achieves the maximum adsorption capacity of 2.18 mmol g⁻¹ for CO₂, which was 5.8% higher than the pristine salen–MOF under the same conditions. Notably, the Freundlich model indicates that the CO₂ adsorption process of all samples conforms to reversible adsorption. However, the correlation coefficients (R²) of the Mg-doped sample are lower than that of the pristine sample. Besides, the CO₂/N₂ adsorption selectivity and isosteric heat also show a similar trend. These results indicate that the salen–Mg can enhance the interaction between the material and CO₂ molecules.     

基于碳化硅衬底的宽禁带半导体外延

宽禁带半导体具备禁带宽度大、电子饱和飘移速度高、击穿场强大等优势,是制备高功率密度、高频率、低损耗电子器件的理想材料。碳化硅(SiC)材料具有热导率高、化学稳定性好、耐高温等优点,在SiC衬底上外延宽禁带半导体材料,对充分发挥宽禁带半导体材料的优势,并提升宽禁带半导体电子器件的性能具有重要意义。得益于SiC衬底质量持续提升及成本不断降低,基于SiC衬底的宽禁带半导体电子市场占比呈现逐年增加的态势。在SiC衬底上外延生长高质量的宽禁带半导体材料是提高宽禁带半导体电子器件性能及可靠性的关键瓶颈。本文综述了近年来国内外研究者们在SiC衬底上外延SiC、氮化镓(GaN)、氧化镓(Ga₂O₃)所取得的研究进展,并展望了SiC衬底上宽禁带半导体外延的发展及应用前景。     

铟镓共掺杂对n-ZnO纳米棒/p-GaN异质结生长行为和光电性能的影响

利用低温水热法在p-GaN薄膜上生长了铟(In)和镓(Ga)共掺杂的ZnO纳米棒。X射线衍射(XRD)、X射线光电子能谱(XPS)和X射线能量色谱仪(EDS)结果表明,In和Ga已固溶到ZnO晶格中。扫描电子显微镜(SEM)结果表明, ZnO纳米棒具有良好的c轴取向性,随着In和Ga共掺杂浓度的增加,纳米棒的直径减小,密度增加。XRD结果表明,In和Ga共掺杂引起ZnO晶格常数增大,导致(002)衍射峰向低角度方向偏移。同时,ZnO的光学性质受到In和Ga共掺杂的影响。与纯ZnO相比, 共掺杂ZnO纳米棒的紫外发射峰都出现轻微红移,这是表面共振和带隙重整效应综合作用的结果。I-V特性曲线表明,随着In和Ga共掺杂浓度的增加,n-ZnO纳米棒/p-GaN异质结具有更好的导电性。